3422014300 air compressor oil separator filter element

The basic information of the 3422014300 air compressor oil separator filter element is as follows:

 Main Functions: Through multilayer composite glass fiber filter media, it mechanically intercepts oil droplets larger than 1 µm in compressed air and condenses and recovers micronlevel oil mist, ensuring that the oil content of the outlet air is ≤3 ppm, meeting the ISO 85731 Class II standard; simultaneously, it maintains the oil level balance of the lubrication system, reducing power consumption.

 Typical Operating Parameters

 Filtration Accuracy: 0.01–500 µm (Common selection around 0.1 µm)

 Initial Pressure Drop: ≤0.02 MPa

 Replacement Pressure Drop: ≥0.15 MPa

 Operating Temperature: 30 ℃ ~ 115–120 ℃

 Maximum Operating Pressure: ≤420 bar (approx. 42 MPa)

 Rated Flow Rate: 6–9100 L/min (Optional depending on the model)

 Filter Media and Structure: Highquality imported glass fiber, metal mesh, sintered felt, or composite filter paper; multistage pleated structure, large dirt holding capacity, high separation efficiency, and tested according to ISO 2942 structural integrity and ISO 2943 compatibility standards.

 Applicable Models: Compatible with various screw/vane air compressors and vacuum pumps, it can replace some original oil separator cores from brands such as Atlas Copco and Sullair, and is widely used in industries such as coal, electronics, textiles, shipbuilding, and aviation.

 Replacement and Maintenance

 Normal lifespan: 3,000–4,500 hours (standard operating conditions). For dusty or hightemperature/highhumidity environments, it is recommended to check or replace after 2,000 hours.

Leah     Sales Manager

Email: [email protected]

Mob & WhatsApp & Wechat&Skype: (+86)19937372138