The basic information for the SZ-1-5-M-V 5-micron stainless steel melt filter element is as follows:

 Basic Parameters

- Filtration Fineness: 5 microns.

- Operating Temperature: -60°C to 500°C.

- Operating Pressure: 0.1-30 MPa.

- Maximum Pressure Differential: 2 MPa.

- Filter Material: Primarily stainless steel fiber sintered felt and stainless steel woven mesh.

- Structure: Available in cylindrical or folded cylindrical shapes. The folded filter area is 3-5 times that of the cylindrical structure.

 Features

- High Porosity: Features high porosity and high contamination capacity.

- Good Air Permeability: Offers excellent air permeability and high contaminant holding capacity.

- High Strength: High strength and toughness, suitable for high-pressure environments.

- High Temperature and High Pressure Resistance: Resistant to high temperatures, high pressures, and chemical corrosion.

- Cleaning and Recycling: Can be cleaned and regenerated for repeated use.

 Application Areas

- Polymer Filtration: Suitable for filtration of high-temperature, high-pressure, high-viscosity, and high-molecular-weight polymers.

- Petrochemical Industry: Suitable for oil refining, chemical production, and separation and recovery of intermediate products.

- Metallurgy Industry: Suitable for filtration of hydraulic systems in rolling mills and continuous casting machines.

- Textile Industry: Purification and uniform filtration of polyester melts during the wire drawing process.

- Electronics and Pharmaceuticals: Pre-treatment filtration of reverse osmosis water and deionized water.

- Thermal and Nuclear Power: Purification of oil in gas turbine and boiler lubrication systems, speed control systems, and bypass control systems.

Leah     Sales Manager

Email:  [email protected]

Mob & WhatsApp & Wechat & Skype: (+86)19937372138