Filter Type: Line gap oil suction filter element, designed for hydraulic systems.

Micron Rating: The specific micron rating can vary, but it typically refers to the size of particles the filter can remove from the oil.

Flow Rate: The capacity of the filter to allow oil to flow through, measured in liters per minute (L/min) or gallons per minute (GPM).

Operating Pressure: The maximum pressure at which the filter can operate, usually given in bar or psi.

Material: The filter elements are often made from materials such as stainless steel, which provides durability and resistance to corrosion.

Size: The physical dimensions of the filter element, including the diameter and length, which are important for ensuring a proper fit within the hydraulic system.

Application: These filters are specifically designed for use in hydraulic systems, particularly at the suction line of the hydraulic pump.

Compatibility: They should be compatible with the type of hydraulic oil used in the system.

Mounting: The filter is designed to be mounted on the tank top or in the suction line of the hydraulic system.

Performance: The filter should maintain a high level of performance, ensuring clean oil is supplied to the hydraulic pump.