The following is basic information about the D-48 water and acid removal filter element:

 Technical Parameters

- Filtration range: 0.01-500μm.

- Operating temperature: -30°C to 115°C.

- Maximum operating pressure: 420 kg.

- Pressure differential: Minimum 0.2 MPa.

- Filter media: Glass fiber, filter paper, metal mesh, metal powder, sintered metal, sintered felt, etc.

 Testing Standards

- ISO 2941: Test method for rupture resistance of filter elements.

- ISO 2942: Test method for structural integrity of hydraulic filter elements.

- ISO 2943: Test method for compatibility of hydraulic filter elements with fluids.

- ISO 3723: End-to-end compliance test for filter elements.

- ISO 3724: Determination of fatigue properties of filter elements.

- ISO 3968: Pressure differential and flow characteristics of filter elements. - ISO 4572: Determination of Filtration Characteristics of Filter Elements by the Multiple-Pass Method.

- ISO 16889: Filtration Ratio/Dirt Holding Capacity.

 Applications

- Industrial Applications: Used in hydraulic oil systems to continuously filter impurities, water, and other contaminants from the oil to ensure proper system operation.

- Petrochemical Industry: Separation and recovery of products and intermediates in oil refining and chemical production processes; liquid purification; purification of magnetic tapes, optical discs, and photographic film in manufacturing; and particle removal from oilfield injection water and natural gas.

- Electronic Precision Industry: Painting, assembly, cleaning, and electroplating.

- Fiber Industry: Used in automatic machinery, wire drawing guns, drying, and dyeing.

- Foundry Industry: Used in hot metal car positioning, cleaning equipment, sand conveying, driving pneumatic tools, sand blasting machines, grinding machines, hoists and lifts, jackhammers, compactors, steel brushes, sandblasting, sand screening, and mud spraying cores. - Forging Industry: Scale blowing, furnace door air curtains, hoists and lifts, bending and straightening machine drives, clutch brakes and clamping devices, forging hammer drives, oil burners.

- Sheet Metal Industry: Solution stirring, chip transport, air jet cleaning, packaging press drives, platen chuck clutches and positioners, pneumatic tools, finishing hammers, picks, drills, grinders, hoists and lifts, combination tools, riveters, sandblasting, lubricant spraying, paint spraying, and container leak detection.

 Features

- Water Removal: Suitable for special system environments, with exceptional water removal capabilities.

- Acid Removal: Suitable for general system protection, with exceptional acid removal capabilities.

- Removal: Can remove wax produced by compressor burn-in.

Leah     Sales Manager

Email:  [email protected]

Mob & WhatsApp & Wechat & Skype: (+86)19937372138