MAHLE PI 1108 MIC 10 Replacement Filter Element

The MAHLE PI 1108 MIC 10 is a hydraulic filter element designed for contamination control in hydraulic and industrial fluid systems. DeMalong Filter supplies replacement filter elements for the MAHLE PI 1108 series, including the 10 micron (MIC 10) configuration.

This replacement filter element is designed for applications where hydraulic oil and other compatible fluids need to be filtered to protect pumps, valves, actuators and other hydraulic components from particulate contamination.

MAHLE PI 1108 MIC 10 Technical Specifications

Dimensions, connection details, seal configuration and pressure ratings should be confirmed against the original PI 1108 element or equipment before ordering. The available product information does not provide sufficient evidence for a unique dimensional specification, so unverified dimensions are not listed here.

PI 1108 MIC 10 Filtration Performance

The MIC 10 configuration is specified for approximately 10 micron filtration. The available product specification also states filtration performance of at least 99.99% for particles in the 10–15 µm range and at least 99.5% for particles at 0.5 µm.

Actual filtration performance depends on the filter media construction, hydraulic fluid, flow rate, differential pressure and operating conditions. For critical hydraulic applications, the replacement element should be matched to the original element's filtration rating and system requirements.

Filter Construction and Materials

The PI 1108 replacement element can be manufactured using hydraulic filter media with metal support and end components. Depending on the required configuration, stainless steel or carbon steel materials may be used, with galvanized or nickel-plated surface treatment available for improved corrosion resistance.

The filter construction is intended to provide mechanical stability during hydraulic operation while maintaining the required filtration area. Material selection should be confirmed according to the hydraulic fluid, temperature and operating pressure.

Applications of MAHLE PI 1108 MIC 10

Replacement PI 1108 MIC 10 filter elements can be used in hydraulic and industrial filtration applications where fine particulate contamination needs to be controlled. Typical application industries include:

• Hydraulic engineering systems
• Mining and metallurgical equipment
• Construction and engineering machinery
• Machine tools
• Agricultural machinery
• Plastic processing machinery
• Petrochemical equipment
• Ship and marine engineering equipment
• Industrial hydraulic power units

MAHLE PI 1108 Replacement Filter Element

DeMalong Filter manufactures aftermarket replacement elements for MAHLE PI 1108 hydraulic filter applications. The replacement can be supplied according to the required filtration rating and element configuration.

How to Confirm the Correct PI 1108 Replacement

Before ordering a replacement filter element, please confirm the complete reference printed on the existing element. For PI 1108 applications, the filtration rating is particularly important because different filter ratings may be used for different hydraulic systems.

1. Confirm the original element reference: PI 1108.
2. Confirm the required filtration rating: MIC 10 / 10 µm.
3. Check the outside diameter, inside diameter and overall length of the original element.
4. Confirm the end-cap and sealing configuration.
5. Provide a photograph of the original filter element or nameplate when available.

If you cannot confirm the dimensions or exact configuration, send us the original PI 1108 part number together with photographs and dimensions. We can check the replacement configuration before quotation.

Quality Testing

PI 1108 replacement filter elements can be manufactured and tested with reference to applicable hydraulic filter testing procedures. The available product specification references tests covering fluid compatibility, flow characteristics, flow fatigue, filter performance, bubble-point integrity, end-cap stress and collapse or burst pressure verification.

Relevant referenced standards include ISO 2943 for fluid compatibility, ISO 3968 for flow characteristics, ISO 3724 for flow fatigue, ISO 2942 for fabrication integrity, ISO 3723 for bubble-point testing and ISO 2941 for collapse pressure verification.

PI 1108 MIC 10 Replacement Filter Quote

DeMalong Filter supplies replacement MAHLE PI 1108 MIC 10 hydraulic filter elements for sample evaluation, maintenance replacement and bulk purchasing. Please provide the required quantity, filtration rating and original element dimensions when requesting a quotation.

MAHLE and PI 1108 are referenced for identification and compatibility purposes only. DeMalong Filter is an independent aftermarket filter supplier and is not affiliated with, sponsored by, or manufactured by MAHLE. All trademarks belong to their respective owners.