Here are the details:

 Part Number  377P (Full Model: 2G-377P-600)

 Filtration Accuracy  5 microns (99%+ removal efficiency)

 Flow Rate  1825 SCFM (Standard Cubic Feet/Minute)

 Filtration Area  50 sq ft (approx. 4.6 sq m)

 Inner Diameter  9 inches (approx. 229 mm)

 Outer Diameter  14 5/8 inches (approx. 371 mm)

 Height  14 1/2 inches (approx. 368 mm)

 Operating Temperature  -26°F ~ 220°F (-15°C ~ 104°C)

 Pressure Drop Replacement Point  15-20 inches of water column (above initial pressure drop)

 Structural Features

- Reinforced Structure: Epoxy-coated steel wire mesh on both sides, supported by a rigid expansion metal core.

End Caps: Galvanized metal end caps with neoprene gaskets (open end).

Pre-Filter: Equipped with a polyurethane pre-filter, increasing dust holding capacity by 40-50%.

Washable: Can be washed with warm water and neutral detergent (recommended to wash up to 3 times).

 Main Application Scenarios

1. Blowers and Compressors: Used for intake air filtration, handling hot air and oil mist discharged from reciprocating/piston compressors.

2. Vacuum Pumps: Leybold vacuum pump filter replacement element (model 121302CSL-377P, pumping speed 3060 m³/h).

3. Blast Furnaces: Air filter cartridge for blast furnace blast stations.

4. Industrial Dust Removal: Heavy dust environments such as rolling mills, continuous casting machines, power plants, and steel mills.

 Relevant Standards

Complies with multiple ISO testing standards:

- ISO - ISO 2941 (Filter Cartridge Burst Resistance)

- ISO 2942 (Structural Integrity)

- ISO 3723 (End Load Test)

- ISO 3968 (Differential Pressure Flow Characteristics)

- ISO 16889 (Filtration Ratio/Dirty Capacity)

Leah     Sales Manager

Email:  [email protected]

Mob & WhatsApp & Wechat & Skype: (+86)19937372138