1. 12VB.36M.40 (Main Filter) / 12VB.36M.50 (Safety Filter)

Type: Dry cylindrical air filter (main filter + safety filter set)

Dimensions (Main Filter 12VB.36M.40): Outer diameter φ378 mm × Inner diameter φ270 mm × Height 484 mm

Dimensions (Safety Filter 12VB.36M.50): Outer diameter φ239 mm × Inner diameter φ195 mm × Height 450 mm

Filter Media: Imported cured wood pulp filter paper, waterproof and moisture-resistant

Filtration Accuracy: ≤10 μm, Efficiency ≥98%

Rated Air Intake: Compatible with 500kW 12V190 diesel/gas generator sets

End Cap/Seal: Metal end cap + NBR sealing ring

Service Life: 3000–5000 km Hours (backflushing possible in dusty environments)

---

 2. 1090440 (Kemper Industrial Fume Filter)

Type: Industrial vacuum extraction/welding fume filter cartridge (VacuFil 500 compatible)

Filter Media: Multi-layer composite (PP pre-filter + ePTFE microporous membrane + polyester support)

Filtration Accuracy: 0.3 μm, ≥99.9% retention efficiency for welding fumes (iron oxide/manganese oxide)

Structure: Anti-static, cylindrical, quick-change snap-fit ​​installation

Compatible Equipment: Kemper VacuFil 500 welding fume purifier, metal processing/automotive manufacturing fume treatment

Operating Temperature: -10℃ ~ +60℃

Replacement Cycle: 2000–4000 hours (depending on fume concentration)

---

 3. 1090447 (Kemper High-Efficiency Fume Filter)

Type: Industrial-grade high-efficiency fume/particulate filter (high-end model in the same series)

Filter Media: Nano-grade ePTFE composite membrane + high-strength polyester fiber support layer

Filtration Accuracy: 0.1 μm, efficiency ≥99.97% (close to HEPA)

Structure: Anti-static, pulse-jet resistant, cylindrical sealing structure

Suitable Scenarios: High-concentration fume from welding/cutting/grinding, air purification in electronic workshops/laboratories, oil fume/oil mist separation

Pressure Resistance: 2.5 bar, pulse-washable and regenerable

Replacement Cycle: 4000–8000 hours (low-dust environment)

 4. 15007017 (Air Compressor/Industrial Dust Removal Air Filter)

Type: Dry cylindrical air filter (screw air compressor/blower pre-filter)

Dimensions: Outer diameter φ240 mm × Inner Diameter φ130 mm × Height 500 mm (approximately SA19500)

Filter Media: Composite wood pulp/polyester fiber, waterproof and oil-proof

Filtration Accuracy: 5 μm, Efficiency ≥99.5%

Rated Flow Rate: Compatible with 15–22 kW screw air compressors

End Cap/Seal: Metal end cap + NBR sealing ring

Initial Differential Pressure: ≤0.02 MPa; Replacement differential pressure ≥0.10 MPa

Lifespan: 3000–5000 hours

Leah      Sales Manager

Email:  [email protected]    

Mob & WhatsApp & Wechat & Skype: (+86)19937372138