704357/F1147 Hydraulic Oil Filter Element Core Basic Information:

 I. Core Basic Attributes

1. **Filter Element Type**: Cylindrical pleated hydraulic oil fine filter element, compatible with imported/domestic industrial hydraulic filter assemblies, primarily for **fine filtration of pressure lines/return lines**, not suitable for coarse filtration of suction lines.

 II. Core Technical Parameters

 1. Core Filtration Indicators

- Filtration Accuracy: **10μm (absolute accuracy)**, fine filtration level, β₁₀≥200, β₁₂≥1000, filtration efficiency ≥99.5%

- Filtration Area: 5.77㎡ (large filtration area, strong dirt holding capacity, extended replacement cycle)

- Filtration Flow Direction: **Outside-In**, the industry standard fine filtration flow direction, impurities are trapped on the outside of the filter element, facilitating observation of the degree of contamination.

 2. Dimensions (International standard, fully compatible with domestic alternatives)

- Overall length: 327.66mm (≈12.9 inches)

- Top outer diameter: 79.25mm (≈3.12 inches), bottom outer diameter is the same as top

- Top inner diameter: 43.18mm (≈1.7 inches)

- Weight: Approximately 2.5-2.8kg, compact design, suitable for equipment with limited installation space.

Leah     Sales Manager

Email:  [email protected]

Mob & WhatsApp & Wechat & Skype: (+86)1993737213